Silkscreen Photoengraving , make a film coated with photosensitive emulsion on the screen. Devoted to the reproduction by ultraviolet light from the photosensitive dry film. I hit the ultraviolet light, make a film emulsion is cured photosensitive material scientifically. UV light exposure we can develop holes and wash down with water. Printable version may be just a place to hole. Currently, most of the emulsion, the pollution may, using the diazo-type photosensitive material. Broadly speaking, if you use oil-based inks, AZO solvent-resistant emulsion-FIX 101, if you use water-based inks, AZOCOL Z-1 is also conveniently be used in both solvent-resistant version. AZO-FIX 101 is now \ 2,100, AZOCOL Z-1 is 3,360 yen. Emulsion in one package, the photosensitive material, contains three of the colorant. Mix all of this container. Photosensitizing agent is a powder used to solve the water as well 100CC. The coating on the screen version of the emulsion using a bucket once you have everything. Emulsion is used, stores it in cool, dark place such as a refrigerator. Degrade the chemical changes proceed emulsion at a warm room. If no mixing of the three points, and can leave it in its stores. 15 to 20 pieces larger plates can be coated with emulsion of 1KG. Tool in the picture below, the photosensitive emulsion,plastic container mix the emulsion by those Heras and the long wooden stick, the sponge wipe the dirt off.